Documentation
LiveSPInstallation Operating GuideDownload PDF
Connectivity
SNMP
The LiveSP server will use the IP address of the loopback interface to reach the router by SNMP. Check SNMP connectivity between LiveSP server and the router before provisioning is performed by running any snmpwalk command from the application to check SNMP connectivity:
> snmpwalk -Os -c -v
For example:
> snmpwalk -Os -c public -v 2c 172.17.50.1 1.3.6.1.2.1.2.2.1.2
Netflow
The IP address associated to the same Loopback interface is configured on CPEs as the source for Netflow monitoring exports to the LiveSP server.